YACHTCLUB.PRO
YachtClub.PRO Research

Warren Yachts

Motor shipyard · Brisbane, Australia

Profile

Overview

Warren Yachts grew out of a single shed at Kincumber, a small town on the New South Wales Central Coast north of Sydney. Founder Dave Warren, a trained boatbuilder who had earlier built wooden boats and ocean racers, set up the yard in the 1980s and grew it into a builder of large composite motor yachts. Over roughly two decades the Kincumber yard delivered 28 boats, from sporty 23-metre cruisers to the 43-metre Slipstream, launched in 2001 to an Ed Dubois design. Its Supernova range of fast motor yachts was built in 75- and 83-foot versions as well as larger custom sizes. In 2003 the business was bought by the Shipworks Group, and in 2005 silt in Kincumber Creek forced the operation north to Shipworks' Brisbane site. At its busiest the company employed around 300 people and turned out up to four boats a year. The global downturn hit hard: by July 2009 the workforce was down to 35, new-build work was put on hold and the team concentrated on refits and servicing. Warren-badged yachts kept appearing on the market afterwards, including a 28-metre GRP motor yacht delivered in 2022, but no current company website or recent official statement could be found. Warren boats were shipped well beyond Australia, with yachts sent to the Mediterranean and America.

Origins

History & Ownership

Dave Warren founded the yard at Kincumber in the 1980s after an apprenticeship in Sydney boatsheds and years building wooden boats and racing yachts at Woy Woy. The Supernova line appeared in the mid-1990s. The 43.4-metre Slipstream was launched in February 2001, and the 114-foot Supernova Crystal Lady was launched from the Kincumber boat ramp the same year. The Shipworks Group bought the company in 2003, and Dave Warren stayed on part-time for a few years. The 75-foot Morpheus was the last boat finished at Kincumber before the move to Brisbane in 2005. In 2008 the company cut 20 of its 150 staff, and by July 2009 new builds had been shelved while refit work continued.

Build philosophy

Engineering & Fleet DNA

Warren built its yachts in composite. The 43.4-metre Slipstream shows the approach: below the waterline the hull is solid glass laid up in vinyl ester resin, and above it the hull and superstructure switch to lighter sandwich construction. That mix keeps strength where the water loads are highest and saves weight higher up. The smaller sport yachts were built for speed. The 22.85-metre Supernova 75 Morpheus uses a planing hull adapted from a patrol-boat design by naval architect Peter Lowe, with propeller tunnels, reverse chines and transom-hung rudders, and is driven by twin 1000 hp Caterpillar C18 engines. Supernova 75 and 83 models were built to CE or RINA certification so they could be sold abroad. Later Warren yachts kept to glass-reinforced plastic: the 28-metre Warren 87/01, delivered in 2022, has both a GRP hull and a GRP superstructure. Dave Warren himself shaped the layouts and worked with interior designers on finish.

Ownership profile

Who Buys Warren Yachts

Warren Yachts suits buyers looking for a fast Australian-built composite motor yacht in the 23 to 43 metre range. The Supernova sport yachts appeal to owners who want speed and open entertaining space for coastal cruising, while the larger flybridge models offer more volume for extended family use.

Market context

How Warren Yachts Compares

Details

Did You Know

  • The 75-foot Morpheus was the last yacht built at Warren's Kincumber yard before the company moved north to Brisbane.
  • The 114-foot Supernova Crystal Lady was launched in 2001 straight from the public boat ramp at Kincumber.
  • Silt building up in Kincumber Creek is what made the original yard unworkable and pushed the move to Brisbane in 2005.

Global footprint

Locations & Contacts

Warren Yachts started at Kincumber on the New South Wales Central Coast, where it built boats for about 20 years. In 2005 the business moved to the Shipworks Group facility in Brisbane, Queensland, where it later focused on refit and servicing work.

Common questions

FAQ

Who founded Warren Yachts?

Boatbuilder Dave Warren, who set up the yard at Kincumber on the New South Wales Central Coast in the 1980s.

Where were Warren yachts built?

At Kincumber, north of Sydney, until 2005, and afterwards at the Shipworks Group site in Brisbane.

What are Warren yachts made of?

Composite: glass-reinforced plastic, with sandwich construction above the waterline on larger yachts such as Slipstream.

What is the largest Warren yacht?

The 43.4-metre Slipstream, designed by Ed Dubois and launched in 2001.

Sources & Last Update

Research: YachtClub.PRO Research · Editor: David MIKHAILOV · Last verified 19 November 2026

  1. Empire Bay Progress Association · accessed 19 November 2026
  2. Sail-World (2009-07-06) · accessed 19 November 2026
  3. Sail-World (2008-05-02) · accessed 19 November 2026
  4. Trade-A-Boat Australia · accessed 19 November 2026
  5. Global Composites · accessed 19 November 2026
  6. YachtBuyer · accessed 19 November 2026
  7. YATCO · accessed 19 November 2026
Members Insight

Private intelligence for yacht owners

Verified risks, broker context and deeper market comparisons are available inside the club.

Request club access →

Private advisory

Building or selling a Warren Yachts?

Discuss the project, sale strategy or an independent valuation with YachtClub.PRO.