YACHTCLUB.PRO
YachtClub.PRO Research

Cantiere delle Marche (CdM)

Motor shipyard · Ancona, Italy · since 2010

Profile

Overview

Cantiere delle Marche, usually shortened to CdM, builds long-range explorer yachts in Ancona, on Italy's Adriatic coast. Ennio Cecchini and Vasco Buonpensiere founded the yard in 2010, and it has stayed focused on go-anywhere motor yachts ever since. Its range is semi-custom: Darwin Class, Flexplorer, RJ, Deep Blue and RAW, alongside one-off projects such as the 45 m Project T and the 43 m Babbo. The yard describes its yachts as steel and aluminium explorers, and the models on its site run from the Darwin 86 up to the Flexplorer 165. The Ancona site is about 16,000 m² and includes workshops and a private dock. In October 2025 the holding company CLP2, a holding company backed by Carisma and the Loro Piana family, took a majority stake. The two founders remain shareholders, with Ennio Cecchini as chairman and Vasco Buonpensiere as CEO. In July 2026 the yard named Filippo D. Buonpensiere as its new Sales Manager to widen its reach in international markets. For an owner, the appeal is a proven explorer platform that can still be shaped to a personal layout.

Origins

History & Ownership

CdM was set up in Ancona in 2010 by Ennio Cecchini and Vasco Buonpensiere, who had seen little supply of fully custom, long-range yachts. Its first superyacht followed in 2011, and the Darwin Class became its first series. The Flexplorer and RJ ranges were added later. In 2022 a management buyout gave the founders and an outside investor ownership of the company; Cecchini became chairman and Buonpensiere CEO. In October 2025 the holding company CLP2 acquired a majority stake, and the founders stayed on as shareholders and executives.

People

Leadership

Vasco Buonpensiere

Co-founder and CEO · since 2022

Co-founder of the yard; previously Sales & Marketing Director.

Ennio Cecchini

Co-founder and Chairman · since 2022

Co-founder; chief executive until 2022.

Filippo D. Buonpensiere

Sales Manager · since 2026

Six years with the company, including pre-owned yacht transactions.

Build philosophy

Engineering & Fleet DNA

CdM builds explorer yachts in steel and aluminium. The Flexplorer 146 shows the approach: a 44.5 m yacht of 475 GT with twin Caterpillar C32 engines, a top speed of 14 knots and a range of more than 5,000 nautical miles at 10 knots. Hydro Tec provided its naval architecture, and Nauta Design the interior. Each hull in the series is arranged differently: the second yacht, Mat, has one deck fewer than the first, Maverick, and a retractable crane in place of an A-frame. This lets the yard reuse a proven platform while changing layout and deck configuration for each owner.

Ownership profile

Who Buys Cantiere delle Marche (CdM)

CdM suits an owner who wants a genuine long-range explorer in the roughly 26 to 50 m range and values a proven platform that can be adapted to a personal layout. Its semi-custom lines and occasional one-offs fit private cruising far from home ports. It is a specialist explorer builder rather than a broad-range yard.

Market context

How Cantiere delle Marche (CdM) Compares

Details

Did You Know

  • The Flexplorer 146 Mat has one deck fewer than the first yacht of the series and uses a retractable crane instead of an A-frame.
  • The Flexplorer 146 is rated for a range of more than 5,000 nautical miles at 10 knots.

Global footprint

Locations & Contacts

The head office and shipyard share one site at Via E. Mattei 36 in Ancona, on Italy's Adriatic coast.

Common questions

FAQ

When was Cantiere delle Marche founded?

Ennio Cecchini and Vasco Buonpensiere founded the yard in Ancona in 2010.

Who owns Cantiere delle Marche?

Since October 2025 the holding company CLP2, backed by Carisma and the Loro Piana family, has held a majority stake. The founders remain shareholders.

Who is the CEO of Cantiere delle Marche?

Vasco Buonpensiere is CEO, according to a July 2026 announcement. Ennio Cecchini is chairman.

What does Cantiere delle Marche build?

Long-range explorer yachts in steel and aluminium, in the Darwin Class, Flexplorer, RJ, Deep Blue and RAW lines, plus one-off projects.

Where is the shipyard?

In Ancona, Italy, at Via E. Mattei 36.

Sources & Last Update

Research: YachtClub.PRO Research · Editor: David MIKHAILOV · Last verified 8 October 2026

  1. Cantiere delle Marche · accessed 8 October 2026
  2. Cantiere delle Marche · accessed 8 October 2026
  3. PressMare · accessed 8 October 2026
  4. PressMare · accessed 8 October 2026
  5. Marine Industry News · accessed 8 October 2026
  6. Yachtbuyer · accessed 8 October 2026
  7. Superyacht24 · accessed 8 October 2026
  8. SuperYacht News · accessed 8 October 2026
  9. Superyachts.com · accessed 8 October 2026
  10. Aziende.it · accessed 8 October 2026
Members Insight

Private intelligence for yacht owners

Verified risks, broker context and deeper market comparisons are available inside the club.

Request club access →

Private advisory

Building or selling a Cantiere delle Marche (CdM)?

Discuss the project, sale strategy or an independent valuation with YachtClub.PRO.